Description
Description: Oil Transport and Distribution Trailer
Need to transport oil for pumping, changing, dispensing, or refueling your vehicle, transformer, or transmission?
Applications: Oil change, pumping, industrial lubrication, transformers, etc.
Open Trailer
Oils: Lubricant, mineral, synthetic, vegetable, dielectric, insulating, and transmission fluid.
This oil transport and distribution trailer is made for you. Approved and compliant with the ADR (French Road Traffic Act) for the transportation of hazardous materials on open roads.
Ideal trailer for your maintenance, industrial lubrication, and oil pumping activities. With a capacity of less than 450L of new oil and 500L of used oil, it benefits from a total exemption from ADR as defined in §1.1.3.6. No basic ADR training is therefore required.
Furthermore, since its weight exceeds 750kg, a BE trailer license is required for its use.
Equipped with aluminum Large Bulk Tanks (IBCs) with a UN identification plate, it is designed with internal anti-roll partitions, a 2″ filler connection with a semi-symmetrical fitting, a pressurized ventilation valve, an air dryer, a suction tube with a ball valve, a mechanical float gauge with a dial visible at the rear, hazardous materials signs, and other regulatory symbols depending on the product to be transported. The Fill’n Oil trailer is equipped with an air dryer to prevent water or moisture contamination in your storage tanks, ensuring high-quality oil.
Our trailer frames are designed to securely accommodate the tanks. Each tank is bolted to the chassis crossmembers for secure attachment to the entire trailer.
The trailer is fully galvanized, with a single axle, V-shaped drawbars with ball joint housing, telescopic jockey wheel and stabilizer stand, a flatbed, mudguards, and crash bars with a high beam bar. Oil Distribution and Pumping
We adapt our oil pumping and filling solutions.
• Pumps dedicated to clean and dirty oil to avoid mixing, plus 1 backup pump.
• For easy oil refilling, the pumps are equipped with a 30 to 60 L/min flow rate regulator at the hose outlet.
• A digital oil distribution meter allows partial and total counting of the pumped volume.
• Three separate 20m x DN25 hose reels for new and used oil, each with color identification.
• Grounding cable with grounding shoe.
• Staubli-type quick-release couplings for quick tool changes.
Regulations for Oil Transport and Distribution Trailers:
For more information, visit our website under regulations.